"on The Road To Aurora" T-shirt Recipe
Make "on The Road To Aurora" T-shirt Recipe in just 2h . Get the full recipe with step-by-step instructions at pekinthechef.com.
Was this page helpful?
Help improve this recipe for others.
Send this recipe to your inbox.
We'll email it straight to you - plus weekly cooking inspiration.
Ingredients
Some product links may be affiliates. If you buy through them, you're supporting the site and Pekin may earn a commission at no extra cost to you.
Fabric Materials
Printing Materials
Tools
Method
Preparation
- 1
Gather Materials
Collect all fabric materials, printing materials, and tools listed in the ingredients section.
- 2
Prewash Fabric
Prewash the cotton and polyester fabric to remove any sizing or chemicals, then dry and iron them flat.
Design Creation
- 3
Design the Graphic
Use graphic design software to create the 'On the Road to Aurora' graphic, ensuring it fits within the dimensions of the t-shirt.
- 4
Print Transfer Paper
Print the design onto transfer paper using an inkjet printer, following the manufacturer's instructions.
- 5
Cut Design
Use the cutting machine to cut out the design from the transfer paper or heat transfer vinyl.
T-Shirt Assembly
- 6
Prepare T-Shirt Blanks
Lay out the t-shirt blanks on a flat surface, making sure they are wrinkle-free.
- 7
Align the Design
Position the cut design onto the front of the t-shirt blanks, ensuring it is centered and straight.
- 8
Heat Transfer Application
Set the heat press machine according to the transfer paper instructions, usually around 350°F (175°C) for 15-20 seconds, and apply pressure to transfer the design onto the t-shirt.
Finishing Touches
- 9
Cool Down
Allow the t-shirts to cool for a few minutes after heat transfer before removing them from the heat press.
- 10
Inspect the Finish
Check each t-shirt for any imperfections in the design or fabric, making sure the print adheres well.
- 11
Final Wash
Wash the finished t-shirts on a gentle cycle and air dry them to ensure durability of the print.
