Was this page helpful?
Help improve this recipe for others.
Send this recipe to your inbox.
We'll email it straight to you - plus weekly cooking inspiration.
Ingredients
Some product links may be affiliates. If you buy through them, you're supporting the site and Pekin may earn a commission at no extra cost to you.
Base Components
Connectivity
Software
Optional Accessories
Method
Setup
- 1
Install the Digital Signage Display
Choose an appropriate location and mount the digital signage display using the mounting bracket. Ensure it is securely attached.
- 2
Connect the Media Player
Attach the media player to the display using the HDMI cable. Make sure both devices are powered off while connecting.
- 3
Connect to Power
Plug in the power cable to both the digital signage display and the media player. Turn on both devices once connected.
Networking
- 4
Connect to the Internet
Use the Ethernet cable to connect the media player to your network router for internet access.
Software Installation
- 5
Install Digital Signage Software
Follow the instructions provided by the software vendor to install the digital signage software on the media player.
- 6
Set up Content Management System
Install and configure the CMS to manage the content that will be displayed on the digital signage.
Final Adjustments
- 7
Adjust Display Settings
Use the remote control (if available) to adjust the display settings such as brightness, contrast, and volume.
- 8
Test the Setup
Run a test to ensure the content is displaying correctly. Make adjustments as necessary.