Jun 09 2026
Restaurants›Bite Me BBQ›T-shirt Front #1 Recipe

T-shirt Front #1 Recipe

Inspired by Bite Me BBQ
Time2h
Serves1

Make T-shirt Front #1 Recipe in just 2h . Get the full recipe with step-by-step instructions at pekinthechef.com.

Was this page helpful?

Help improve this recipe for others.

Send this recipe to your inbox.

We'll email it straight to you - plus weekly cooking inspiration.

Ingredients

Some product links may be affiliates. If you buy through them, you're supporting the site and Pekin may earn a commission at no extra cost to you.

Base Ingredients

Method

Preparation

  1. 1

    Gather Your Materials

    Collect all the necessary materials: a cotton T-shirt, fabric paint, a stencil (if using), a paintbrush, masking tape, and cardboard.

  2. 2

    Prepare Your Workspace

    Find a flat surface to work on and lay down some newspaper or a plastic sheet to protect it from paint spills.

  3. 3

    Insert Cardboard

    Place a piece of cardboard or thick paper inside the T-shirt to prevent paint from bleeding through to the back.

Painting

  1. 4

    Secure the T-shirt

    Use masking tape to secure the T-shirt to your working surface. This will prevent it from moving while you paint.

  2. 5

    Position the Stencil (if using)

    If you're using a stencil, position it on the T-shirt and secure it with masking tape to hold it in place.

  3. 6

    Apply Fabric Paint

    Using the paintbrush, apply the fabric paint to the T-shirt. Make sure to cover the stencil completely if using one, or paint directly onto the fabric for a freehand design.

  4. 7

    Let It Dry

    Allow the paint to dry completely, following the instructions on the fabric paint label for drying times.

Finishing Touches

  1. 8

    Remove the Stencil

    Carefully remove the stencil (if used) once the paint is dry.

  2. 9

    Final Drying

    Let the painted T-shirt sit for a few hours to ensure that the paint is fully set.

  3. 10

    Wash Instructions

    Wash the T-shirt inside out in cold water to preserve the design. Avoid using bleach or fabric softeners.

More from Bite Me BBQ