Kent Falls Patio Chair Recipe
Make Kent Falls Patio Chair Recipe in just 3h . Get the full recipe with step-by-step instructions at pekinthechef.com.
Was this page helpful?
Help improve this recipe for others.
Send this recipe to your inbox.
We'll email it straight to you - plus weekly cooking inspiration.
Ingredients
Some product links may be affiliates. If you buy through them, you're supporting the site and Pekin may earn a commission at no extra cost to you.
Wood Components
Hardware
Finishing
Method
Preparation
- 1
Select Wood
Choose high-quality cedar wood planks and a plywood sheet for the seat. Ensure there are no defects.
- 2
Cut Wood
Cut the cedar wood planks into appropriate lengths for the chair frame and legs. Cut the plywood into a seat shape.
Assembly
- 3
Construct Frame
Use wood screws and wood glue to assemble the frame of the chair. Begin by attaching the planks to form the base.
- 4
Attach Legs
Securely attach the legs to the base using wood screws, ensuring stability.
- 5
Attach Seat
Once the frame is stable, attach the plywood seat to the top of the frame using screws.
Finishing
- 6
Sand the Chair
Use medium grit sandpaper to smooth out any rough edges on the chair. Pay special attention to corners and edges.
- 7
Stain the Wood
Apply outdoor wood stain evenly over the entire chair using a paintbrush. Allow the stain to dry according to the manufacturer’s instructions.
