Eye Tooth Logo Pint Glass Recipe
Make Eye Tooth Logo Pint Glass Recipe in just 45m. Get the full recipe with step-by-step instructions at pekinthechef.com.
Was this page helpful?
Help improve this recipe for others.
Send this recipe to your inbox.
We'll email it straight to you - plus weekly cooking inspiration.
Ingredients
Some product links may be affiliates. If you buy through them, you're supporting the site and Pekin may earn a commission at no extra cost to you.
Glass Preparation
Design Creation
Application
Method
Glass Preparation
- 1
Prepare Cleaning Solution
Begin by cleaning the pint glass thoroughly. Add a squirt of dish soap to a bowl of warm water.
- 2
Clean the Glass
Immerse the pint glass in the soapy water and scrub gently to remove any dirt or grease.
- 3
Rinse and Dry
Rinse the glass under clean water and dry it completely with a lint-free cloth.
Design Creation
- 4
Cut Vinyl Design
Using a craft knife, cut out your desired logo from the vinyl sheet on a cutting mat.
- 5
Weed the Design
Once the logo is cut, use a weed tool to carefully remove the excess vinyl, leaving only the design.
- 6
Apply Transfer Tape
Transfer the vinyl logo onto a transfer tape by applying it over the design and smoothing it down.
Application
- 7
Apply the Vinyl
Position the vinyl logo on the clean pint glass and press it firmly in place using an application tool.
- 8
Remove Transfer Tape
Slowly peel away the transfer tape, ensuring the vinyl remains on the glass.
- 9
Seal the Design
If desired, apply a clear coat sealant over the vinyl for added durability once the vinyl is securely applied.